Tumbler Wrap Designer for Laser Engraving and UV Print
Short answer: Choose a tumbler style, place your artwork, and inspect it on a live cup preview in Print Laser Pro's tumbler workspace. Work in a laser engraving or UV print flow and export a production file after checking the dimensions of your actual blank.
Specifications
- Production paths
- Laser engraving and UV print
- Preview
- Live cup preview with wrap and 3D views
- Artwork
- Add your own image or design to the selected cup style
- Laser file
- Export SVG artwork for your laser workflow
- Before production
- Measure the real blank and confirm its usable decoration area
Key features
- Cup style selection: Start from a tumbler style in the catalog and adjust the artwork for the blank you actually stock.
- Live visual preview: Inspect the design on a cup, including wrap and 3D views, as you place artwork.
- Two production methods: Use separate laser engraving and UV print paths for the same tumbler design task.
- Production handoff: Export artwork, then verify final size and machine settings in your production software.
Wrap guides and downloads
- Free Polar Camel ringneck wrap SVG guides: 20 oz and 30 oz starting layouts with removable guide outlines and size references.
- How to measure a tumbler for laser engraving: Measure your blank, set safe margins, place the seam, and verify your rotary setup.
Frequently asked questions
- Are the wrap dimensions guaranteed to fit every 20 oz tumbler?
- No. Tumblers sold under the same capacity can have different heights, tapers, and printable areas. Use the selected style as a starting point, then measure your actual blank and adjust the design before production.
- Can I preview my artwork on a cup before engraving or printing?
- Yes. The tumbler workspace shows your design on a live cup preview, including wrap and 3D views. A visual proof helps you check placement, but it does not replace a physical size check or test run.
- Can I use the builder for both laser engraving and UV printing?
- Yes. The tumbler workspace has separate laser engraving and UV print paths. Pick the method that matches your equipment and blank, and verify the exported file in your production software.
- Will the SVG be ready to run in LightBurn without checking it?
- Import the SVG into LightBurn and confirm dimensions, position, layers, rotary settings, and material settings before running the laser. The cup preview does not set up your machine for you.