Richardson 935 Rope Hat Mockup and Patch Size Guide
Short answer: The Richardson 935 is a rope-visor hat shops treat as a different silhouette from the 112 trucker. Start most front patches around 2.5 to 3.25 inches wide and 1.5 to 2 inches tall, then confirm the rope line and crown on a 935-specific Print Laser Pro mockup before production.
Quick specifications
- Model
- Richardson 935 rope hat
- What changes vs 112
- Rope visor and a different front read
- Recommended patch start
- 2.5–3.25 in wide × 1.5–2 in tall
- Next step
- Proof on a 935 mockup, then sample the blank
Starting decoration sizes for a Richardson 935
| Shape | Starting size | Production note |
|---|---|---|
| Rectangle | 3 × 1.75 in | Keep height under the rope line |
| Circle | 2–2.25 in diameter | Center above the visor rope |
| Wide wordmark | 3.25 × 1.25 in | Test both ends on the crown curve |
| Tall badge | 2.25 × 2 in | Confirm it does not crowd the rope |
Production recommendations
- Do not reuse a 112 preview: The rope visor changes how the front decoration sits. A 112 mockup overstates usable height.
- Watch the rope: Leather and PVC patches that sit too low will collide with the rope. Mock the rope in the proof.
- Sample the blank: Starting sizes are conservative. Approve one decorated 935 before a run.
Frequently asked questions
- Is the Richardson 935 the same as a 112?
- No. The 935 is a rope hat. Print Laser Pro keeps a separate size page so the proof is not a 112 clone.
- What size patch fits a 935?
- Start near 3 × 1.75 inches and confirm on a 935 mockup. Height is usually the first thing to trim.
- Can I laser engrave a 935?
- Yes — proof the burn on the 935 crown in Print Laser Pro, then test the actual material and machine settings.
Sources
- Richardson product catalog — accessed 2026-07-17